1. NECKLACE SIZE GUIDE

How to measure for necklace length:
– Measure around the base of your neck and add a few inches to determine a comfortable length.
– For a custom fit, use a string to find where you want the necklace to sit, then measure the string against a ruler. 

项链尺码指南

如何测量项链长度:
– 步骤 1:用软尺测量脖部的基部,即锁骨上方的位置。
– 步骤 2:在此基础上加几厘米(约2-4厘米),以确定您所需的舒适项链长度。
– 定制合适长度:可以用一根绳子或柔软的材料绕脖子,找到您想要项链停留的位置,标记后用尺子测量长度。

 

2.BRACELET SIZE GUIDE

How to Measure Your Wrist for a Bracelet in cm:
1. Use a flexible measuring tape: Wrap it around your wrist, just above the wrist bone.
2. If you don’t have a measuring tape: Use a piece of string or paper, mark the length, then measure it against a ruler.
3. Make sure the tape or string is snug but not tight, as you want a comfortable fit.

After measuring, compare the wrist measurement with the guide to choose the appropriate bracelet size. If you prefer a looser fit, you can add 1-2 cm to the wrist measurement. 

手链尺码指南

如何测量手腕尺寸(单位:厘米):
1. 使用软尺:将软尺绕在手腕上,位置应在腕骨上方(即手腕最窄处)。
2. 如果没有软尺:可以使用绳子或纸条,围绕手腕标记长度,然后用直尺测量。
3. 测量提示:确保软尺或绳子贴合手腕,但不要过紧,以保证佩戴舒适。

尺码选择说明:
– 测量后,将手腕围度与尺码指南对比,选择适合的手链尺寸。
– 松紧度:如果您喜欢较松的佩戴感,可以在手腕围度基础上加1-2厘米。如果喜欢紧一些的佩戴感,可以减去1-2厘米。

 

3. RING SIZE GUIDE

How to measure for ring size:
– Measure the circumference of your finger using a flexible measuring tape/paper.
– Alternatively, use a ring you already wear and measure its inner diameter with a ruler. 

戒指尺码指南

如何测量戒指尺寸:
1. 测量手指围度:用软尺测量手指根部的围度,即戒指佩戴位置。
2. 替代方法:如果您已经有合适的戒指,可以测量戒指的内径来确定尺寸。

测量小贴士:
– 建议在一天结束时测量手指,这时手指因自然肿胀会稍大一些。
– 如果介于两个尺码之间**,建议选择较大的尺寸,以确保舒适。

 

4. BANGLE SIZE GUIDE

How to measure for bangles:
– Measure the circumference of your wrist or use a bangle that fits you well and measure its inner diameter.

Hand Clenched Perimeter Method
This method helps determine your bangle size by measuring the circumference of your hand when clenched into a fist. It’s especially useful for selecting bangles that don’t have an adjustable opening.

Tools You’ll Need:
Measuring tape (or a flexible tape measure)
Steps to Measure:
Make a fist and tuck your thumb in: Close your hand into a fist and tuck your thumb down into the palm of your hand. Your fingers should curl naturally into a relaxed fist shape.

Measure the widest part of your hand: Wrap the measuring tape around your clenched fist at the widest part, which is usually across the knuckles. Ensure the tape is snug but not tight.

Record the circumference: The measurement you get around your clenched fist is the circumference of your hand. This number will help you determine the right bangle size. 

手镯尺码指南

如何测量手镯尺码 :
1. 测量手腕围度:用软尺绕在手腕上,位置应在腕骨上方。
2. 替代方法:如果有合适的手镯,可以测量手镯的内径。

手握拳围度法
通过测量手部握紧拳头时的围度来确定手镯尺码,这种方法特别适用于选择没有可调节开口的硬质手镯。

所需工具:
– 软尺(或可调节尺带)

测量步骤:
1. 握拳并收拢拇指:将手指自然弯曲,收拢拇指,确保拇指靠在手掌内侧,形成一个轻松的拳头。
2. 测量手部最宽部分:用软尺绕手部最宽处(通常是手指关节的地方),确保软尺紧贴但不紧绷。
3. 记录围度:测得的围度即为您手部的围度,这个数据将帮助您选择合适的手镯尺码。

 

 


 

General Tips:
– For bracelets and bangles: If you prefer a looser fit, add a half inch to your wrist measurement. If you like a snug fit, subtract half an inch.
– For rings: Measure your fingers at the end of the day when they are slightly larger due to warmth.

常见建议:
– 手链和手镯:如果您喜欢松一些的佩戴感,可以在手腕围度上加大约1厘米。如果喜欢更贴合的佩戴感,可以减去1厘米。
– 戒指:建议在一天的晚些时候测量您的手指,因为手指此时较为膨胀,尺寸会稍大。
– 可调节珠宝:对于可调节的手镯或弹性手链,您可以选择接近自己手腕围度的尺寸,以确保佩戴舒适。

Upload Image...